Table of Contents
Advertisement
Cameras are available in AC mains, and AC and DC low voltage types.
power consumption of a camera is less than 5 Watts.
Cameras that are intended to operate directly from the mains supply are fitted with a non-
detachable power supply cord. The voltage of operation is clearly marked on the rear panel of
the camera. REFER TO THE WIRING INSTRUCTION LABEL ATTACHED TO THE SUPPLY CORD
and terminate the cord with the appropriate mains plug fitted with a 3A fuse.
Ensure that a secure means of isolation from the mains is provided for the camera in accordance
with the national wiring regulations of the country of installation.
Cameras fitted with an automatic switching power supply operate between 11-28 VDC and
20-29 VAC. Connections are indicated above the terminals on the rear panel of the camera.
Suitable lens types are C and CS mount in fixed iris, manual iris, auto iris or direct drive versions.
Sizes are shown below. Cameras are factory set for CS mount lenses. If using a C mount lens,
rotate the back focus adjustment mechanism fully clockwise (when viewed from the front of
the camera) before fitting the lens—see
10
Lens Size
1/3"
1/2"
2/3"
1"
POWER SUPPLY
.
LENS SELECTION
.
.
. The typical
.
Advertisement
Table of Contents
