Automatic Setting; Tv System - Panasonic DIGA DMR-ES15 Operating Instructions Manual

Automatic setting

You can restart auto channel setting if the channel reception setting
(Ô page 11) fails for some reason.
After performing steps 1–4 (Ô page 42)
5
Press [e,r] to select "Auto-Setup
Restart" and press [ENTER].
The confirmation screen appears.
6
Press [w,q] to select "Yes" and
press [ENTER].
For Australia and N.Z.
• If the Country setting menu appears on the television
Press [e,r] to select the country and press [ENTER].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
Press and hold [2 CH] and [CH 1] on the main unit until the
Country setting screen or the Auto-Setup screen appears.
• All the settings except for the ratings level, ratings password and
time settings return to the factory preset. The timer recording
programmes are also cancelled.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
List of TV Reception Channels
For Australia and N.Z.
Tuner Channel
VHF
System Coverage
PAL-B Australia 0-12
PAL-BG New Zealand 1-11
For Asia
Channel
Tuner System VHF
Coverage
PAL-DK,
OIRT R1-R12
SECAM-DKK1
PAL-BGH,
CCIR E2-E12 E21-E69
SECAM-BG
Hong
PAL-I
Kong
PAL-D China 1-12
For Middle East and South Africa
Channel
Tuner System VHF
Coverage
PAL-BGH,
CCIR E2-E12 E21-E69
SECAM-BG
UHF CATV
28-69 45 MHz–470 MHz
21-69 44 MHz–470 MHz
UHF CATV
21-69 44 MHz–470 MHz
S01-S05
M1-M10, U1-U10
S21-S41
– 21-69 –
13-57 Z1-Z35
UHF CATV
S01-S05
M1-M10, U1-U10
S21-S41

TV System

Refer to the control reference on page 38.
Change this setting if you connect an NTSC television or to record
NTSC video from another source.
1
While stopped
Press [FUNCTIONS].
2
Press [e,r] to select "To Others" and
press [ENTER].
3
Press [e,r] to select "Setup" and
press [ENTER].
4
Press [e,r] to select "Connection"
and press [q].
5
Press [e,r] to select "TV System"
and press [ENTER].
6
Press [e,r] to select the TV system
and press [ENTER].
TV System
Setup
PAL
NTSC
Tuning
Disc
Picture
• PAL (factory preset)
– Select when connecting to a PAL or Multi-system
television. Programmes recorded using NTSC are played
as PAL 60.
– Select to record television programmes and PAL input from
other equipment.
• NTSC
– Select when connecting to an NTSC television. Television
programmes cannot be recorded properly.
– Select to record NTSC input from other equipment.
The confirmation screen appears.
7
Press [w,q] to select "Yes" and press
[ENTER].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
n To change the setting all at once (PAL
While stopped, press and hold [g] and [; OPEN/CLOSE] on the
main unit at the same time for about 5 seconds.
↔
NTSC)
RQT8317
43