Check, Change Or Delete A Programme - Panasonic DIGA DMR-ES15 Operating Instructions Manual

Check, change or delete a programme

Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Icons
Timer recording standby is activated.
This programme is currently recording.
The times overlap those in another
W
programme. Recording of the programme
with the later start time starts when the
earlier programme finishes recording.
You stopped a weekly or daily timer
recording. The icon disappears the next
time the timer programme starts recording.
The disc was full so the programme failed to
F
record.
The material was copy-protected so it was
not recorded.
The programme did not complete recording
X
because the disc is dirty or some other
reason.
n To change a programme
Press [e,r] to select the programme and press [ENTER]. (Ô page 19, Manually programming timer recordings, step 3)
n To delete a programme
Press [e,r] to select the programme and press [ ].
n To exit the timer recording list
Press [PROG/CHECK].
• Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.
Timer Remain
Recording 8:17:23
No. Name Date Start Stop Mode
01 ARD 7. 5. SUN 19:00 20:00 SP
New Timer Programme
Press ENTER to store new programme.
ENTER
S SUB MENU CANCEL A Timer Off
RETURN
Message displayed in the "Drive space" line
OK: Displayed if the recording can fit in
the remaining space.
1:57 SP
→ (Date): For recordings made daily or
7. 5. SUN
Drive
weekly, the display will show until
space
OK when recordings can be made (up
to a maximum of one month from
the present time) based on the
time remaining on the disc.
!: It may not be possible to record
because:
• no disc is inserted
• the disc is write-protected
• there is no more space left
• the number of possible titles has
reached its maximum.
RQT8317
21