Step 1 Connection - Panasonic DIGA DMR-ES15 Operating Instructions Manual

STEP 1 Connection

Make sure to use the pair of supplied RF coaxial cables
Use the pair of supplied RF coaxial cables only when you make connections to the unit through the RF IN and RF OUT terminals. Striping may
appear and disrupt images on the TV if you use different cables for connection.
• Before connection, turn off all equipment and read the appropriate operating instructions.
• Select the connection pattern that matches your environment from patterns A-B. Confirm connections not listed below with your
dealer.
For Middle East and South Africa
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
Connecting a television
To the aerial
Aerial
cable
RF coaxial
cable
(included)
Connecting to a television with 21-pin Scart terminal
You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.
If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output
on this unit.
Required setting
"AV1 Output" in the Setup menu (Ô page 40)
RQT8317
8
Television's rear panel
VHF/UHF
RF IN
RF coaxial cable
(included)
Audio/Video cable
(included)
AC mains lead (included)
Connect only after all other connections
AUDIO IN VIDEO
R L IN
are complete.
For Middle East and South Africa
• Use the AC mains lead that matches the
Red White Yellow
socket for the area you live in.
For Saudi Arabia
Other connections (Ô page 10)
Red White Yellow
To household mains socket
For Australia and N.Z.
(AC 220 to 240 V, 50 Hz)
For Asia, Middle East
and South Africa
(AC 220 to 240 V, 50/60 Hz)
This unit's rear panel