Check, Change Or Delete A Programme; Notes On Timer Recording - Panasonic DMR-XW400 Operating Instructions Manual

Advanced timer recording

Check, change or delete a programme

Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Timer Recording
Remain HDD 30:24 DR
Date Service Name Drive/Mode
MON 12/1 1:59 - 2:55
France 2
Programme Name
MON 12/1 2:06 - 2:08
France 2
Programme Name
SUN 12/7 2:16 - 2:17 France 3
Programme Name
New Timer Programme
OK Total 3/32 DELETE
Timer Off
RETURN
Icons
F
Red :Timer recording standby is activated.
Grey:Timer recording standby is not activated.
This programme is currently recording.
[
Part or all of the programme will not be recorded since
the programme is overlapping.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not
recorded.
The programme did not complete recording because
the disc is dirty or some other reason.
Timer programmes set to Auto Renewal Recording
( 33).
Timer programmes that will be relief recorded to the
HDD.
OK: Displayed if the recording can fit in the
remaining space.
> (Date): For recordings made daily or weekly, the display
will show until when recordings can be made
(up to a maximum of one month from the
present time) based on the time remaining on
the disc.
! : It may not be possible to record because:
≥there is not enough space left.
≥the number of possible titles has reached its
maximum.( 29)
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. ( 32,
step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
∫ Confirm the History List
1 Press the "Green" button.
2 Press [3, 4] to select the programme and press [OK].
≥Reason why the timer recording failed or similar can be
confirmed.
≥Press the "Green" button to return to the previous screen.
∫ To exit the timer recording list
Press [PROG/CHECK].
[Note]
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
RQT9249
34
DVD 1:58 SP MON 12/01/08 1:30
Space
HDD/DR

OK
HDD/DR

OK
HDD/DR

OK
Page
CH
History List
Page

Notes on timer recording

≥Only 1 programme can be set to timer record on the disc.
≥Timer recording will not be performed if the clock is not set.
≥If the "TV System" ( 86) in the Setup menu was modified to
playback a disc or a title while on timer recording standby, return
the setting to original before the recording is started.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing. Depending on the state of the unit, playback may stop
when recording begins.
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥When you programme successive timer recordings to start
immediately one after the other, last 1 minute of earlier programme
will not be recorded unless it can perform 2 programmes
simultaneous recording.
Programme
Programme
Recorded Recorded
First 1 minute of the following programme is not recorded either if
the following programme set to be recorded is also DVD.
≥If the start of 2 timer recordings overlap with each other when 2
programme simultaneous recording is not possible, the
programme with the earlier start time will be recorded.
Starting of the timer recording while executing other operation
96
Not recorded