Bosch Quigo Original Instructions Manual page 25

OBJ_BUCH-1630-003.book Page 25 Thursday, April 3, 2014 4:49 PM
– Screw the adapter plate 8 onto the 1/4" male thread 9 of the holder and
screw it on applying moderate force. Mount the measuring tool onto the
adapter plate in such a manner that the latches of the adapter plate engage in
the recesses on two sides of the measuring tool. Check the tight seating of the
measuring tool.
– Place the measuring tool via the tripod mount 4 onto the 1/4" male thread 9
of the holder and screw it on applying moderate force. Do not overtighten the
measuring tool, otherwise it can become damaged.
Adjust the holder roughly before switching on the measuring tool. For this, loos-
en the locking screw 10 for the holder and move the measuring tool until horizon-
tally positioned at the desired height. Retighten the locking screw.
Working with the Tripod (Accessory)
A tripod offers a stable, height-adjustable measuring support. Place the measur-
ing tool via the tripod mount 4 onto the 1/4" male thread of the tripod and screw
the locking screw of the tripod tight.
To swiftly remove and remount the measuring tool from the tripod, use the
adapter plate 8 of the holder 12. For this, screw the tripod locking screw to the
adapter plate and engage or disengage the measuring tool to/from the adapter
plate.
Adjust the tripod roughly before switching on the measuring tool.
Laser Viewing Glasses (Accessory)
The laser viewing glasses filter out the ambient light. This makes the red light of
the laser appear brighter for the eyes.
 Do not use the laser viewing glasses as safety goggles. The laser viewing
glasses are used for improved visualisation of the laser beam, but they do not
protect against laser radiation.
Bosch Power Tools
English | 25
1 609 92A 0JV | (3.4.14)