Weider WEBE15911.0 User Manual page 7

2. Pull the Short Knob (44) outward, extend the Top
Frame (1) as far as possible, and then release
the Knob. Make sure that the Knob is engaged
in the hole in the Bottom Frame (2).
Then, pull the Long Knob (55) outward, move the
Adjustment Leg (5) outward as far as possible,
and release the Knob into one of the adjustment
holes in the Adjustment Leg. Make sure that the
Knob is engaged in an adjustment hole in the
Adjustment Leg.
3. Attach the Stabilizer (6) to the Adjustment Leg
(5) with three M8 x 52mm Bolts (40), three M8
Washers (54), and three M8 Locknuts (46).
Make sure that the Bolts are in the hexagonal
holes.
2
3
46
Hexagonal
Holes
7
1
5
55
44
2
46
54
6
54
5
40
40