Audio Output; Audio Setting - Pioneer BDP-3140 Operating Instructions Manual

Audio Output

1. Press HOME MENU.
[General Setting] menu is displayed.
2. Press  to select [Audio Output],
then press  .
3. Select an option, press  to access.
Audio Output

Audio Setting

Sound Retriever
Digital output
HDMI Audio
Max Sampling Freque...
DRC
Use cursor key to move focus, use "Enter" key
to select
Exit
4. Press  to select a setup option and
press  .
5. Select the setting you wish to change
and press OK to confi rm.
- Press  to return to the previous menu.
- Press HOME MENU to exit the menu.
Audio Setting
• [Sound Retriever]
When compressed audio is subjected to
compression process, some parts may be
deleted. When you turn on the Sound
Retriever function, sound quality will be
improved by making up for the part that had
been deleted.
{On} – Turn on the Sound Retriever function.
Off
{Off} – Turn off the Sound Retriever function.
PCM
• [Digital output]
PCM
48Kz Select the output mode of optical jack, options
Auto
include Bitstream, PCM, Auto and Off.
{Bitstream} – Output digital signal without
any processing.
Reture
{PCM} – Select this to output digital audio
signals converted to 2-channel audio signals.
{Reencode} – When a BD containing
secondary audio and interactive audio is
played, the two audio signals are mixed and
converted to Dolby Digital audio or DTS audio
for output.
{Off} – Select this function when digital audio
signals are not used.
05
33