Front Panel; Rear Panel - Pioneer BDP-3140 Operating Instructions Manual

Front panel

01
1 OPEN/CLOSE - Press to open and
close the disc tray.
2  STANDBY/ON - Press to turn the
power on and off.
3 Disc tray
4 Remote control sensor - Point the
remote control to this, then operate it within
approximately 7 m.The player may have
trouble capturing remote control signals if
there is a fl uorescent light nearby. If this
happens, move the player away from the
fl uorescent light.

Rear panel

1
AC IN
1 AC IN - Connect the supplied power cord.
2 LAN (10/100) terminal - Use this to
connect to a network with an always-on
broadband connection.
3 HDMI OUT terminal - Outputs video/audio
signals.
12
3
2 3 4 5
1
4
5
5 Front panel display
6 USB port - (page 15)
7 Reset button - If the power cannot be
turned off (set to standby), use a thin rod to
press this button. When the Reset button
is pressed, power to the unit is turned off
(standby status). When the  STANDBY/ON
button is pressed to turn on the power, the
unit becomes operational again.
8  - Press to start playback.
9  - Press to stop playback.
4 AUDIO OUT terminals - Outputs audio
signals.
5 DIGITAL OUT (OPTICAL) terminal -
Output digital audio signals when
connecting the optical digital cable.
2
6 7 8 9