Table of Contents
Advertisement
LSQT1214_GN.book 30 ページ ２００７年２月８日 木曜日 午後８時５０分
Setup
Display style
[Y/M/D]
2007.12.15
[M/D/Y]
12.15.2007
[D/M/Y]
15.12.2007
≥ The date and time function are driven by a
built-in lithium battery.
≥ Make sure to check the time before recording.
≥ If the time display becomes [- -], the built-in
lithium battery has run down. Use the following
steps to charge the battery. When you turn on
the power for the first time after charging, a
message asking you to set the date and time
will appear. Select [YES] and set the date and
time.
To recharge the built-in lithium battery
Connect the AC adaptor or attach the battery
to the unit, and the built-in lithium battery will
be recharged. Leave the unit as it is for approx.
24 hours and the battery will save the date and
time for approx. 6 months. (Even if the OFF/
ON switch is set to OFF, the battery is still
being recharged.)
WARNING
THE LITHIUM BATTERY IN THIS UNIT MUST
ONLY BE REPLACED BY QUALIFIED
PERSONNEL. IF THIS IS NECESSARY,
CONTACT THE PANASONIC CUSTOMER
CARE CENTRE ON 132600 FOR YOUR
NEAREST AUTHORIZED SERVICE CENTRE.
30
LSQT1214
Adjusting the LCD
Screen display
monitor
Adjusting the brightness and
colour level
1
2
The bar display moves.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOUR]:
Colour level of the LCD monitor
≥ When the LCD monitor is rotated by 180°
≥ These settings will not affect the images
Press the MENU button, then
select [SETUP] # [LCD SET] #
[YES] and press the joystick.
Move the joystick up or down to
select the item to be adjusted.
Then, move the joystick left or
right to make the adjustment.
towards the lens, the brightness and colour
level of the LCD monitor cannot be adjusted.
actually recorded.
MENU
Advertisement
Table of Contents
