Hide thumbs Also See for MC-UG773:
Table of Contents

Advertisement

BEFORE REQUESTING SERVICE
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Review this chart to find do-it-yourself solutions for minor performance
problems. Any service needed, other than those described in these
Operating Instructions, should be performed by an authorized service
representative.
PROBLEM
POSSIBLE CAUSE
Vacuum cleaner
1. Unplugged at wall outlet.
will not run.
2. ON-OFF switch not turned on.
3. Tripped circuit breaker/blown
fuse at household service panel.
4. Tripped thermal protector.
Poor job of dirt
1. Full or clogged dust bag.
pickup.
2. Broken belt.
3. Clogged body or nozzle hose.
4. Body hose not inserted fully.
5. Worn agitator.
6. Hole in body or nozzle hose.
7. Dust cover improperly installed.
8. Belt not installed on motor shaft.
Dust escapes
1. Bag improperly installed.
the dust bag.
2. Bag torn.
Light will
1. Burned out light bulb.
not work.
Bag holder does
1. Secondary filter improperly
not assemble
installed
properly
POSSIBLE SOLUTION
1. Plug in firmly. Push ON-OFF
switch to ON.
2. Push ON-OFF switch to ON.
3. Reset circuit breaker or replace
fuse.
4. Unplug vacuum cleaner, wait thirty
(30) minutes, plug in and switch to
ON.
1. Change dust bag.
2. Replace belt.
3. Clean body or nozzle hose area.
4. Insert body hose.
5. Replace agitator.
6. Replace body or nozzle hose.
7. Properly install dust cover.
8. Install belt on motor shaft.
1. Properly install bag.
2. Replace bag.
1. Replace light bulb.
1. Properly install secondary filter
- 38 -

FEATURE CHART

Power
Thermal Protector
Yes
120V AC (60 Hz)
Tableau des caractéristiques
Protecteur thermique Longueur du cordon
Alimentation
Oui
120 V c.a. (60 Hz)
Diagrama de características
Protector termal
Voltaje
Si
120 V c.a. (60 Hz)
Cord Length
Tools
9.1 m (30 Ft.)
Yes
Accessoires
9.1 m (30 pi)
Oui
Extensión de cordón
Herramientas
9.1 m (30 pi)
Si
- 11 -

Advertisement

Table of Contents
loading

Table of Contents