D-Link DWL-8200AP Install Manual page 4

Step 1
Connect one end of an Ethernet cable (included with your package) to the
LAN 1 (PoE) port on the DWL-8200AP, and the other end of the Ethernet
cable to the port labeled P+DATA OUT on the PoE base unit.
Step 2
Connect another Ethernet cable from the DATA IN port on the PoE base
unit to your router/switch or to a PC.
Step3
DATA
Step 3
Attach the power adapter to the connector labeled POWER IN on the PoE
base unit. Attach the power cord to the power adapter and into an electrical
outlet.
4
P+DATA
OUT
Step1
IN
Step2
Router or Switch
(Straight Through Cable)
DWL-8200AP
Line1(PoE)
Computer
(Straight Through Cable)