Disassemby And Assenbly; Replace 0-T100; Arrangement Of Lead Wires On 0-T100 - Pentax K100D SUPER Service Manual

DISASSEMBY AND ASSENBLY

1．Replace 0-T100
◆ When replaced T100, the following procedure is required
【Caution】
① Install FW for replaced T100
② Install product FW
③ Initialize the data
Important note: It should be done from ① → ② → ③
2．Arrangement the lead wires on ０－T100
① x 3 ( Yellow, purple, blue)
② Arrange the lead wires as follows
Fix the lead wire by T66（BT6x15）and T65（BT6x8）
76706-0-T100
①
76700-0-T100
（76700-T100-07）
(0-T770)
Yellow
Violet
Blue
T66
T66
T65
②
⇒
T66
76706 -3/6-