Buffalo WHR-HP-G300N Setting Manual page 3

WHR-HP-G300N Router Settings (For: HKBN, I-Cable, HGC DHCP User)
9. Click "Wireless Config"
Under page "WPS", please
Click "Apply" to save settings
Wait for about 1 minute.
Last Updated 28/11/2009 Hornington KB:
UNCHECK "enable" option behind "WPS"
http://kb.hornington.com
10. Click "Basic (11n/g/b)"
Wireless Channel, choose a channel used for the router.
In general, you are suggested to try channel
each channel for a few days to test which channel is more stable in
your environment. Please
- SSID, choose "Enter", then type a
the router. (You may use "0-9", "a-z" and "A-Z" as SSID. Space
between characters is NOT recommended)
- "Wireless authentication", choose "WPA-PSK"
- "Wireless encryption", choose "AES"
- "WPA-PSK (Pre-shared Key)"
password (wireless encryption key)
(* You may use 0-9, a-z and A-Z, the wireless password is
case-sensitive)
Then press "Apply".
11, 6, or 1. You may use
do not use "Auto Channel"
new wireless network name
Enter an 8-63 characters wireless
WHR-HP-G300N DHCP Settin
for
gs Page 3