English - TP-Link TL-WPA4220 Quick Installation Manual

English

Buttons
Press the button to start Wi-Fi Clone. (For details, see Unify
and Extend Wi-Fi Network via Wi-Fi Clone Button.)
Wi-Fi/Wi-Fi
Press the button for 5 seconds to enable or disable the
Clone Button
wireless function.
Pair Button Pair button is used to secure a powerline network.
Press the Reset button for more than 5 seconds, the device
Reset Button
will restore to its factory defaults.
Unify and Extend Wi-Fi Network via Wi-Fi Clone Button
If you have established a Wi-Fi network with a router supporting WPS, you
can unify and extend this current network using the Wi-Fi Clone button.
During the Wi-Fi Clone process, the extender will automatically copy the
SSID and wireless password of your router, giving you a seamless roaming
wireless networking experience . See the steps below to get started.
1) Plug in the Wi-Fi Powerline Extender near your wireless router.
2) Press the WPS button on the router.
3) Press the Wi-Fi Clone button on the extender and the Wi-Fi Clone
LED will begin blinking slowly. In about 20 seconds, all the LEDs
will be solid momentarily and then the Wi-Fi LED will begin blinking
quickly, indicating that the Wi-Fi clone process is complete.
Description
INTERNET
WPS/
ROUTER WISP
INTERNET RESET
Wireless Router
6
WPS/
ROUTER WISP
RESET