Pip Mode (Picture In Picture) - Fujitsu Siemens Computers MYRICA V27-1 Operating Manual

PIP mode (Picture in Picture)

The LCD TV can also display a sub-video signal in addition to the main video signal.
The sub-video signal is shown as a "PIP display" in a window on the main display.
► Press the PIPSOURCE (5) button on the remote control to activate the PIP mode.
► Press the PIPSOURCE button again to select the source from which the signal for the PIP
display is to come.
Depending on which source the signal for the main display comes from, you can use certain sources
for the signal of the PIP display.
The following combination options are available to you:
Signal
source
s
TV
AV
SV
SCART 1
SCART 2
VGA
DVI
YPbPr
A26361-K1037-Z120-1-M119, edition 1
Downloaded From TV-Manual.com Manuals
TV AV SV
- - -
- - -
- - -
- - -
- - -
LCD TV MYRICA V27-1 / V32-1
Main display
SCART 1 SCART 2
- -
- -
- -
- -
- -
VGA DVI YPbPr
- - -
- - -
- - -
English - 29