Setting Language Of The Osd Menu; Carrying Out Programme Search - Fujitsu Siemens Computers MYRICA V27-1 Operating Manual

LCD TV MYRICA V27-1 / V32-1

Setting language of the OSD menu

After switching on the device, set the language of the OSD (On Screen Display) menu according to
your needs.
► Switch the LCD TV on with the ON/OFF switch.
► Press the POWER button.
► Press the MENU button to open the OSD menu.
► Choose the SYSTEM menu item using the
► Press the
The menu item LANGUAGE is preset.
► Press the
► Select the language to be shown in the OSD menu with the
► Press the Menu button. The OSD menu will be changed over to the selected language.

Carrying out programme search

A programme search must be carried out to put the LCD TV into operation. Use the supplied remote
control.
► Switch the LCD TV on with the ON/OFF switch.
► Press the POWER button.
► Press the MENU button to open the OSD menu.
► Choose the TV SETUP menu item using the
► Press the
The menu item CH-SCAN is preset.
► Press the
► Select your country with the
► Press the
Wait until the programme search is completed. Then the device shows the first programme found.
Different programmes are available on some channels at different times. As a result, it is
i
possible that, depending on the time of a programme search, different programmes will be
found.
12 - English
Downloaded From TV-Manual.com Manuals
button to activate the menu item.
button to activate the menu item.
button to activate the menu item.
button to activate the menu item.
button.
button to start the programme search.
button.
button.
button.
A26361-K1037-Z120-1-M119, edition 1