Fujitsu Siemens Computers MYRICA V27-1 Operating Manual
Fujitsu Siemens Computers MYRICA V27-1 Operating Manual

Fujitsu Siemens Computers MYRICA V27-1 Operating Manual

Hide thumbs Also See for MYRICA V27-1:

Advertisement

Contents
Introduction........................................................................................................................................... 1
Notational conventions ................................................................................................................. 2
Important notes..................................................................................................................................... 2
Safety notes.................................................................................................................................. 2
Cleaning ....................................................................................................................................... 3
Transport ...................................................................................................................................... 4
Power cable.................................................................................................................................. 4
CE marking................................................................................................................................... 4
Disposal and recycling ................................................................................................................. 4
Preparing for use .................................................................................................................................. 5
Unpacking and checking the delivery........................................................................................... 5
Preparing remove control ............................................................................................................. 5
Inserting batteries................................................................................................................. 5
Replacing batteries............................................................................................................... 6
Installing LCD TV ......................................................................................................................... 6
Connections on LCD TV............................................................................................................... 7
Connecting LCD TV ................................................................................................................... 10
Switching LCD TV on/off ............................................................................................................ 11
Setting language of the OSD menu............................................................................................ 12
Carrying out programme search................................................................................................. 12
Adjusting programme settings.................................................................................................... 13
Arranging programmes....................................................................................................... 13
Changing programme properties........................................................................................ 14
Setting the channel............................................................................................................. 15
Add Programs .................................................................................................................... 16
Operation............................................................................................................................................ 17
Operating elements on the device.............................................................................................. 17
Changing the device settings with the buttons of the control panel ........................................... 18
Remote control ........................................................................................................................... 19
PIP (Picture in Picture) ....................................................................................................... 19
Teletext............................................................................................................................... 20
Changing device settings with remote control............................................................................ 21
Description of menus.................................................................................................................. 22
DISPLAY menu - default picture settings ........................................................................... 23
ADVANCED menu - advanced picture settings ................................................................. 24
GEOMETRY menu - picture position and sharpness......................................................... 25
TV SETUP menu - setting channels................................................................................... 26
AUDIO menu - sound settings............................................................................................ 27
SYSTEM menu - system settings....................................................................................... 27
Display modes .................................................................................................................................... 28
Main display mode ..................................................................................................................... 28
PIP mode (Picture in Picture) ..................................................................................................... 29
Technical data .................................................................................................................................... 30
VESA-DDC-compatible VGA interface....................................................................................... 32
Preset operating modes ............................................................................................................. 32
Power consumption .................................................................................................................... 32
PC Analogue (D-SUB)................................................................................................................ 33
PC Digital (DVI-D) ...................................................................................................................... 33
SCART (Half/Full)....................................................................................................................... 34
S-Video....................................................................................................................................... 34
Colour and transmission system by country............................................................................... 35
Troubleshooting.................................................................................................................................. 38
A26361-K1037-Z120-1-M119, edition 1
Downloaded From TV-Manual.com Manuals
English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MYRICA V27-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fujitsu Siemens Computers MYRICA V27-1

  • Page 1: Table Of Contents

    Contents Introduction............................1 Notational conventions ......................... 2 Important notes............................. 2 Safety notes..........................2 Cleaning ............................3 Transport ............................4 Power cable..........................4 CE marking........................... 4 Disposal and recycling ......................... 4 Preparing for use ..........................5 Unpacking and checking the delivery................... 5 Preparing remove control ......................
  • Page 2 Downloaded From TV-Manual.com Manuals...
  • Page 3: Introduction

    Introduction Your new LCD TV MYRICA V27-1 / V32-1possesses a whole range of useful features and functions, e.g.: ● TFT monitor (Thin Film Transistor; active matrix) ● analogue tuner for VHF, UHF and cable programmes ● connections for SCART (video and RGB), video and S-Video ●...
  • Page 4: Notational Conventions

    In this chapter you will find information regarding safety which is essential to take note of with your LCD TV. This product from Fujitsu Siemens Computers contains intellectual property of third parties. Any tampering with or modification of the product will void the warranty and may lead to legal prosecution to the full extent of the law.
  • Page 5: Cleaning

    LCD TV MYRICA V27-1 / V32-1 ● If you use a different PC data cable from the one supplied, ensure that it is adequately shielded. CE conformance and optimum picture quality are guaranteed only if you use the data cable supplied.
  • Page 6: Transport

    LCD TV MYRICA V27-1 / V32-1 Transport ● Transport the device with care and only in its original packaging or another corresponding packaging to protect it from knocks and jolts. ● Never drop the LCD TV (danger of glass breakage).
  • Page 7: Preparing For Use

    LCD TV MYRICA V27-1 / V32-1 Preparing for use Unpacking and checking the delivery The display surface of the LCD TV is sensitive to pressure and scratches. Always hold the device by the casing! ► Unpack all the individual parts.
  • Page 8: Replacing Batteries

    LCD TV MYRICA V27-1 / V32-1 Replacing batteries ► When the batteries are used up, replace them with two batteries of the same type (type AAA). Do not throw batteries or accumulators into the household waste. They must be disposed of in accordance with local regulations concerning special waste.
  • Page 9: Connections On Lcd Tv

    LCD TV MYRICA V27-1 / V32-1 Connections on LCD TV Observe the safety precautions in the "Important notes" chapter in this operating manual. Do not cover the ventilation openings of the monitor. Never open the housing of the power supply unit. There is extreme danger from an electrical shock with the housing open.
  • Page 10 LCD TV MYRICA V27-1 / V32-1 The following devices can be connected to this LCD TV: SPEAKER Connection terminals for external loudspeakers red/right/+ With the sliding switch you change over from internal to black/right/- external loudspeakers and vice versa. black/left/-...
  • Page 11 LCD TV MYRICA V27-1 / V32-1 SCART1 Connection for AV, RGB and audio input signals e.g. for satellite receiver, DVD player, video recorder, camcorder, decoders or a gaming console Out (TV-signal): e.g. video recorder, dvd recorder SCART2 Connection for AV, RGB and audio input signals e.g.
  • Page 12: Connecting Lcd Tv

    LCD TV MYRICA V27-1 / V32-1 Connecting LCD TV Connecting antenna ► Connect an antenna cable to the device and the TV antenna socket. Connecting the power supply ► Plug the power cable supplied into the power connector of the LCD TV.
  • Page 13: Switching Lcd Tv On/Off

    LCD TV MYRICA V27-1 / V32-1 Switching LCD TV on/off MYRICA V27-1 ► Press the On/Off switch at the lower right on the front of the LCD TV. MYRICA V32-1 ► Press the On/Off switch at the lower left on the front of the LCD TV.
  • Page 14: Setting Language Of The Osd Menu

    LCD TV MYRICA V27-1 / V32-1 Setting language of the OSD menu After switching on the device, set the language of the OSD (On Screen Display) menu according to your needs. ► Switch the LCD TV on with the ON/OFF switch.
  • Page 15: Adjusting Programme Settings

    LCD TV MYRICA V27-1 / V32-1 The programmes will be entered in the programme list in the order in which they are found. However, you can change the order of the programmes later (see "Arranging programmes"). Adjusting programme settings After the programme search, you can change various programme settings later, e.g. the order of the programmes in the programme list, the programme names or the frequency of a channel.
  • Page 16: Changing Programme Properties

    LCD TV MYRICA V27-1 / V32-1 The programme list will be displayed with the first 9 programmes found. If a programme name was detected during the programme search, it will be displayed. ► Select the programme you want to move with the buttons and mark it by pressing button.
  • Page 17: Setting The Channel

    LCD TV MYRICA V27-1 / V32-1 Changing programme name Five characters are available for the programme name. ► Mark the position for the character you want to change under ID with the buttons ► Select the desired character at this position with the buttons ►...
  • Page 18: Add Programs

    LCD TV MYRICA V27-1 / V32-1 Add Programs Different programmes are available on some channels at different times. As a result, it is possible that, depending on the time of a programme search, different programmes will be found. With this function you search for additional programmes when a programme search has already been carried out.
  • Page 19: Operation

    LCD TV MYRICA V27-1 / V32-1 Operation Controls are provided on the device and the remote control for operating the LCD TV. Operating elements on the device The operating controls of the LCD TV are located in the underside of the device. With these buttons you can operate the basic functions of the LCD TV and the OSD menu.
  • Page 20: Changing The Device Settings With The Buttons Of The Control Panel

    LCD TV MYRICA V27-1 / V32-1 Changing the device settings with the buttons of the control panel Use the buttons of the control panel to make the following device settings directly while the OSD menu is switched off. Selecting picture signal source ►...
  • Page 21: Remote Control

    LCD TV MYRICA V27-1 / V32-1 Remote control 1 = POWER - switches the device on or into the standby mode. 2 = MUTE - switches the sound on and off. 3 = FREEZE - freezes the video picture. If you press the button again, the picture returns to the normal mode.
  • Page 22: Teletext

    LCD TV MYRICA V27-1 / V32-1 Teletext 16 = TELETEXT - activates the Teletext function If you press the button again, Teletext with the TV function is activated. When you press the button a third time, the Teletext function is switched off.
  • Page 23: Changing Device Settings With Remote Control

    LCD TV MYRICA V27-1 / V32-1 Changing device settings with remote control You can open and operate the integrated OSD (On Screen Display) menu with the buttons of the control panel on the LCD TV or the remote control. The VOLUME- control button is equivalent to the button on the remote control.
  • Page 24: Description Of Menus

    LCD TV MYRICA V27-1 / V32-1 Description of menus The OSD menu is available in different languages. The English menu names are used in the following description (default setting). Different menus and different options are available to you depending on the set signal source.
  • Page 25: Display Menu - Default Picture Settings

    LCD TV MYRICA V27-1 / V32-1 DISPLAY menu - default picture settings CONSTRAST (contrast) For TV/S-VIDEO/SCART/YPbPr: This function increases or decreases the contrast. Possible values: 0 -100 BRIGHTNESS (brightness) With this function you set the picture brighter or darker. Possible values: 0 -100 COLOUR TEMP (colour temperature) With this button you set the colour temperature.
  • Page 26: Advanced Menu - Advanced Picture Settings

    LCD TV MYRICA V27-1 / V32-1 ADVANCED menu - advanced picture settings PICTURE MODE With this function you set the picture mode. Possible values: MOVIE, SPORT, GAME, VIVID, USER The following options are only available if you have selected the USER setting under PICTURE MODE.
  • Page 27: Geometry Menu - Picture Position And Sharpness

    LCD TV MYRICA V27-1 / V32-1 GEOMETRY menu - picture position and sharpness These settings are only available when you use the LCD TV as a monitor for your PC (SOURCE=PC). AUTO (automatic setting) With this function you set the picture settings automatically.
  • Page 28: Tv Setup Menu - Setting Channels

    LCD TV MYRICA V27-1 / V32-1 TV SETUP menu - setting channels CH SCAN (automatic programme search) With the button you start the automatic programme search. The automatic programme search must be carried out when you want to use your LCD TV for the first time following installation.
  • Page 29: Audio Menu - Sound Settings

    LCD TV MYRICA V27-1 / V32-1 AUDIO menu - sound settings BALANCE With this function you set the balance between the left and the right loudspeaker. BASS This button increases or decreases the bass level. Possible values: 0 -100 TREBLE This button increases or decreases the treble level.
  • Page 30: Display Modes

    LCD TV MYRICA V27-1 / V32-1 Display modes Main display mode ► Press the SOURCE button on the remote control or on the underside of the LCD TV to select the source from which the signal for the main display is to come.
  • Page 31: Pip Mode (Picture In Picture)

    LCD TV MYRICA V27-1 / V32-1 PIP mode (Picture in Picture) The LCD TV can also display a sub-video signal in addition to the main video signal. The sub-video signal is shown as a "PIP display" in a window on the main display.
  • Page 32: Technical Data

    LCD TV MYRICA V27-1 / V32-1 Technical data MYRICA V27-1 MYRICA V32-1 Screen: Visible area / screen size: 597.12 mm (H) x 335.68 mm (V) 708,95 mm (H) x 398,59 mm (V) diagonal 26.37 " diagonal 32,02 " Picture format:...
  • Page 33 LCD TV MYRICA V27-1 / V32-1 Compatibility: TV system: PAL & SECAM Video system: PAL & SECAM 640 x 350 @ 70 Hz 640 x 480 VGA @ 60 Hz, 72 Hz, 75 Hz 800 x 600 SVGA @ 56 Hz, 60 Hz, 72 Hz...
  • Page 34: Vesa-Ddc-Compatible Vga Interface

    LCD TV MYRICA V27-1 / V32-1 VESA-DDC-compatible VGA interface Your LCD TV is equipped with a VESA-DDC-compatible VGA interface and a DVI-D interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the LCD TV and the computer. If your computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your LCD TV and select the appropriate settings.
  • Page 35: Pc Analogue (D-Sub)

    LCD TV MYRICA V27-1 / V32-1 PC Analogue (D-SUB) Meaning Meaning Video input red +5 V (DDC) Video input green Sync. earth Video input blue Earth Earth DDC-Data Earth H. sync Red video earth V. sync Green video earth DDC Clock...
  • Page 36: Scart (Half/Full)

    LCD TV MYRICA V27-1 / V32-1 SCART (Half/Full) Meaning Meaning Meaning Sound (R) output Changeover voltage Red *) Sound (R) input Green earth *) Blanking *) Sound (L) output Not assigned Video output earth Sound signal earth Green *) Video input earth...
  • Page 37: Colour And Transmission System By Country

    LCD TV MYRICA V27-1 / V32-1 Colour and transmission system by country Country Colour Stereo Subtitles Albania Austria FM-FM Teletext Azores Bahrain Belgium Nicam Teletext Bulgaria SECAM Canary Islands Croatia Cyprus Czech Republic SECAM / PAL Denmark Nicam Teletext Egypt...
  • Page 38 LCD TV MYRICA V27-1 / V32-1 Norway Nicam 36 - English A26361-K1037-Z120-1-M119, edition 1 Downloaded From TV-Manual.com Manuals...
  • Page 39 LCD TV MYRICA V27-1 / V32-1 Country Colour Stereo Subtitles Poland Teletext Portugal Teletext Rumania Russia SECAM Saudi Arabia SECAM Slovakia SECAM / PAL Slovenia South Africa Spain Nicam Teletext Sweden Nicam Teletext Switzerland FM-FM Teletext Tunesia SECAM Turkey Teletext...
  • Page 40: Troubleshooting

    LCD TV MYRICA V27-1 / V32-1 Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the LCD TV should, if possible, be checked on another signal source and/or with another data cable.
  • Page 41 LCD TV MYRICA V27-1 / V32-1 Having this problem? Check the following points: The picture has shadows or ghost images Check antenna cable Use a directional antenna instead of an omnidirectional antenna. Picture shows interference, false colours or line Check whether the LCD TV is set to the correct and picture shaking TV standard (PAL or SECAM).

This manual is also suitable for:

Myrica v32-1

Table of Contents