Table of Contents
Advertisement
LCD TV MYRICA V30-1
TV mode
Having this problem?
No picture (power indicator glows orange)
Message:
No Signal
No sound
No picture, only static
Picture is fuzzy
The picture has dark interference lines and a
strong humming sound can be heard.
The remote control does not work.
22
Check the following points:
►
Check the setting of the picture signal
source.
►
Alter the brightness and/or contrast until
you get a picture.
►
Check the setting of the picture signal
source.
►
Check whether the antenna or data cable is
correctly connected.
►
Check the volume setting.
►
Check whether the device is muted.
►
Check that the antenna cable is correctly
connected.
Reception may be poor.
►
Check that the antenna cable is correctly
connected.
Reception may be poor.
There may be an interference signal on the
antenna cable.
►
Have the installation checked.
A sheath current filter from the accessories trade
can provide a remedy.
►
Check whether the batteries in the remote
control are still sufficiently charged.
►
Make sure that the sensor for the remote
control on the LCD TV is not exposed to
strong light.
A26361-K933-Z120-1-7619, edition 1
Advertisement
Table of Contents
