Table of Contents
Advertisement
∫ Setting the White Balance manually
(White set
Use this mode when you want to set the
white balance manually.
1 Set to [
] (White Set) and then
press 1.
2 Aim the camera at a sheet of white paper
or a similar white object so that the frame
on the centre of the screen turns white
and then press 1.
WHITE SET
SET
∫ Finely Adjusting the White Balance
(White Balance Fine Adjustment
When you cannot acquire the desired hue
by setting the white balance, you can adjust
the white balance finely.
1 Set the white balance to [
[
]/[
]/[
]. (P66)
2 Press 3 several times until
[WB ADJUST.] appears.
WB ADJUST.
RED
SELECT
Recording pictures (advanced)
)
CANCEL
MENU
]/[
]/
BLUE
EXIT
3 Finely adjust the white balance.
• 1 [BLUE]: Press when the hue is
reddish.
• 2 [RED]: Press when the hue is
bluish.
About the white balance
• In simple mode [
fixed to [AUTO].
• When taking a picture with the flash, the
white balance will be automatically
adjusted [except for [
[
] (Flash)], but the white balance may
not be properly adjusted when the photo
flash is insufficient.
About the white balance fine adjustment
• The white balance icon on the screen
turns red or blue.
)
• You can set the value independently for
each of the modes in white balance.
• The setting on the fine adjustment of the
white balance is reflected to the picture
when taking a picture with the flash.
• When you set the white balance using the
White set [
set to "0".
• When the colour effect is set to any of
[COOL], [WARM], [B/W] or [SEPIA] (P74),
you cannot finely adjust the white balance.
], the white balance is
] (Daylight) and
], the adjustment level is
67
Advertisement
Table of Contents
