Attaching the Lens Hood
In bright sunlight or backlight, the lens hood
will minimize lens flare and ghosting.
The lens hood cuts off excess lighting and
improves the picture quality.
• Check that the camera is turned off and
that the lens is retracted.
• Close the flash.
1 1 Adjust A on the lens hood
adaptor to [UNLOCK].
2 Place the camera upside down.
Align [UNLOCK] to B on the
camera and then attach the
lens hood adaptor to the
camera.
[ UNLOCK ]
18
Preparation
2 Rotate the ring C to the direction
of the arrow until [LOCK] is
adjusted to A on the adaptor.
[ LOCK ]
• Rotate the ring until it clicks.
3 1 Place the camera right side up.
Adjust D on the lens hood to
E on the lens hood adaptor.
2 Rotate the lens hood from E to
F.