Setting Date/Time (Clock Set) - Panasonic Lumix DMC-FZ3GN Operating Instructions Manual

Setting Date/Time (Clock Set)

∫ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
PLEASE SET THE CLOCK
CLOCK SET
• When pressing the [MENU] button, the
screen shown in step 2 appears.
• The screen disappears in about
5 seconds. Start from step 1.
1 Select [CLOCK SET] from the
[SETUP] menu. (P22)
SHUTTER
VOLUME
CLOCK SET
NO.RESET
RESET
SELECT
MENU
20
Preparation
MENU
2
SETUP /
3
LEVEL
3
EXIT
MENU
2 Set date and time.
CLOCK SET
10 00 : 11 DEC 2004
D/M/Y
SELECT SET
• 2/1: Select the desired item.
• 3/4: Set date and time.
3 Select [D/M/Y], [M/D/Y] or [Y/M/D].
CLOCK SET
10:00111.DEC.2004
D/M/Y
SELECT SET
• Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
. .
EXIT
MENU
EXIT
MENU