HP 5920 Configuration Manual page 89
Acl and qos
Hide thumbs
Also See for 5920:
- Command reference manual (607 pages) ,
- Configuration manual (424 pages) ,
- Fc and fcoe configuration manual (257 pages)
Table of Contents
Advertisement
Figure 26 Network diagram
Configuration procedure
# Create a periodic time range during 8:00 and 18:00 on working days from June 201 1 to the end of
the year.
<DeviceA> system-view
[DeviceA] time-range work 08:00 to 18:00 working-day from 00:00 6/1/2011 to 24:00
12/31/2011
# Create an IPv4 basic ACL numbered 2001, and configure a rule in the ACL to permit only packets from
192.168.1.2/32 during the time range work.
[DeviceA] acl number 2001
[DeviceA-acl-basic-2001] rule permit source 192.168.1.2 0 time-range work
[DeviceA-acl-basic-2001] rule deny source any time-range work
[DeviceA-acl-basic-2001] quit
# Apply IPv4 basic ACL 2001 to filter outgoing packets on interface Ten-GigabitEthernet 1/0/2.
[DeviceA] interface ten-gigabitethernet 1/0/2
[DeviceA-Ten-GigabitEthernet1/0/2] packet-filter 2001 outbound
[DeviceA-Ten-GigabitEthernet1/0/2] quit
Verifying the configuration
# Display time range configuration and status on Device A.
[DeviceA] display time-range all
Current time is 13:58:35 5/20/2011 Friday
Time-range : work (Active)
08:00 to 18:00 working-day
from 00:00 6/1/2011 to 00:00 1/1/2012
The output shows that the time range work is active.
83
Advertisement
Table of Contents
