HP 5920 Configuration Manual page 66

Step
6. Configure a priority
marking action.
7. Return to system view.
8. Create a QoS policy and
enter QoS policy view.
9. Associate the traffic class
with the traffic behavior in
the QoS policy.
10. Return to system view.
11. Apply the QoS policy.
12. (Optional.) Display the
priority marking
configuration.
Command
•
Set the DSCP value for packets:
remark [ green | red | yellow ] dscp
dscp-value
•
Set the 802.1p priority for packets or
configure the inner-to-outer tag priority
copying function:
remark { [ green | red | yellow ] dot1p
dot1p-value | dot1p customer-dot1p-trust }
•
Set the drop priority for packets:
remark drop-precedence
drop-precedence-value
•
Set the IP precedence for packets:
remark ip-precedence ip-precedence-value
•
Set the local precedence for packets:
remark [ green | red | yellow ]
local-precedence local-precedence-value
•
Set the local QoS ID for packets:
remark qos-local-id local-id-value
•
Set the CVLAN for packets:
remark customer-vlan-id vlan-id
•
Set the SVLAN for packets:
remark service-vlan-id vlan-id
quit
qos policy policy-name
classifier classifier-name behavior
behavior-name
quit
•
Applying the QoS policy to an interface
•
Applying the QoS policy to a VLAN
•
Applying the QoS policy globally
display traffic behavior user-defined
[ behavior-name ]
60
Remarks
Use one or more of the
commands.
By default, no priority
marking action is
configured.
The switch supports local
QoS IDs in the range of 1
to 3999.
The remark
local-precedence, remark
qos-local-id, and remark
drop-precedence
commands apply to only
the incoming traffic.
The customer VLAN
(CVLAN) is the private
network VLAN of the
customer, and the service
provider VLAN (SVLAN)
is the public network
VLAN assigned by the
service provider to the
customer. For more
information about the
CVLAN and SVLAN, see
Layer 2—LAN Switching
Configuration Guide.
N/A
By default, no QoS policy
is configured.
By default, a traffic class
is not associated with a
traffic behavior.
N/A
Choose one of the
application destinations
as needed.
By default, no QoS policy
is applied.
Available in any view.