Setting Date/Time (Clock Set) - Panasonic Lumix DMC-FX38 Operating Instructions Manual

Preparation

Setting Date/Time (Clock Set)

•
The clock is not set when the camera is shipped.
1
Turn the camera on.
•
The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
mode.)
A [MENU/SET] button
B Cursor buttons
2 Press [MENU/SET].
3
Press 2/1 to select the items (year, month,
day, hour, minute, display sequence or time
display format), and press 3/4 to set.
A: Time at the home area
B: Time at the travel destination (P56)
‚: Cancel without setting the clock.
•
Select either [24HRS] or [AM/PM] for the time display
format.
•
AM/PM is displayed when [AM/PM] is selected.
4
Press [MENU/SET] to set.
•
After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to recording mode, and check that the display reflects the settings that were
performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
below.
16
VQT1S07
:
:
"
Changing the clock setting
OFF ON
MENU
/SET
"
procedure