Taking Pictures Using Auto Bracket - Panasonic Lumix DMC-FX38 Operating Instructions Manual

·¿
[REC] mode:

Taking Pictures using Auto Bracket

In this mode, 3 pictures are automatically recorded in the selected exposure
compensation range each time the shutter button is pressed. You can select the picture
with the desired exposure from the 3 pictures with different exposures.
With auto bracket d1 EV
1st picture
d0 EV
1
Press 3 [È] until [AUTO BRACKET] appears, set
the compensation range of the exposure with 2/1.
•
When you do not use auto bracket, select [OFF] (0).
2 Press [MENU/SET] to finish.
•
You can also press the shutter button halfway to finish.
Note
•
When setting auto bracket, [
•
When taking pictures using auto bracket after setting the exposure compensation range, the
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower
left of the screen.
•
The auto bracket setting is cancelled if you turn the camera off or [POWER SAVE] is activated.
•
When auto bracket is set, the auto review function is activated regardless of the auto review
setting. (The picture is not enlarged.) You cannot set the auto review function in the [SETUP]
menu.
•
The exposure may not be compensated with auto bracket depending on the brightness of the
subject.
•
[Œ] is set for the flash when auto bracket is set.
•
Burst is cancelled when auto bracket is set.
2nd picture
j1 EV
] appears on the screen.
Advanced (Recording pictures)
3rd picture
i1 EV
VQT1S07
43