Linksys LAPAC2600 User Manual page 40

WPA2-Enterprise
Fast Roaming
(802.11r)
Primary Server
Primary Server Port
Primary Shared
Secret
Backup Server
Backup Server Port
Backup Shared
Secret
WPA Algorithm
Enable or disable Fast Roaming (802.11r).
Fast Roaming (802.11r) minimizes the delay when a
voice client transitions from one BSS to another
within the same ESS. Fast BSS Transition establishes
security and QoS states at the target AP before or
during a re-association. This minimizes the time
required to resume data connectivity when a BSS
transition happens.
Important Points to Remember:
Fast Roaming (802.11r) is operational only if

the wireless client has support for 802.11r
standard. If the client does not have support for
802.11r standard, it falls back to normal WPA2
authentication method.
If Fast Roaming (802.11r) is enabled, some

clients without 802.11r supported may fail to
connect to the network.
Only one SSID of the AP can be enabled with

Fast Roaming (802.11r) .
Enter the IP address of the RADIUS Server on your
network.
Enter the port number used for connections to the
RADIUS Server. It is a value from 1 to 65534, and
default is 1812.
Enter the key value to match the RADIUS Server. It
consists of 1 to 64 characters.
The Backup Authentication Server will be used when
the Primary Authentication Server is not available.
Enter the port number used for connections to the
Backup RADIUS Server. It's a value from 1 to 65534,
and default is 1812.
Enter the key value to match the Backup RADIUS
Server. It consists of 1 to 64 characters.
The encryption method is AES.
40