Linksys LAPAC2600 User Manual page 28

802.1x Supplicant
802.1x
Enable if your network requires this access point to use
802.1X authentication in order to operate.
Supplicant
Authentication
This feature supports following two kinds of authentication:
•
•
Discovery Settings
Bonjour
Enable if administrator wants the access point to be
discovered by Bonjour enabled devices automatically. If
VLAN is enabled, the discovery packets will be sent out via
management VLAN only. The access point supports http
and https services.
LLDP
Enable if administrator wants the access point to be
discovered by switch by LLDP protocol. Information such as
product name, device name, firmware version, IP address,
MAC address and so on will be advertised.
LLDP-MED
Enable if administrator wants the access point to be
discovered by switch by LLDP-MED protocol. Information
such as product name, device name, firmware version, IP
address, MAC address and so on will be advertised.
Authentication via MAC Address
Select this if you want to use MAC Address for
authentication.
The access point uses lowercase MAC address for
Name and Password, like xxxxxxxxxxxx.
Authentication via Name and Password
Select this if you want to use name and password for
authentication.
Name - Enter the login name. The name includes 1 to 63
characters. Special characters are allowed.
Password - Enter the desired login password. The
password includes 4 to 63 characters. Special
characters are allowed.
28