Linksys LAPAC2600 User Manual page 105

Configuration files copy/save
Configuration Files
Configuration Files
Copy/Save
Configuration Files Table
Configuration Files
Name
Create Time
There are two kinds of configuration files in the access
point.
 Backup Configuration — An additional
configuration file saved in the flash memory
for use as a backup.
Current Configuration — The configuration

which is running in the device currently. When
device boots up, device will read the settings
from this file.
Copy configuration file from one to another.
Source Configuration can be one of following:
Backup Configuration (if it exists)

Current Configuration

Destination Configuration can be one following:
Backup Configuration

Current Configuration

Need note that Source Configuration and Destination
Configuration cannot be same and if you copy Backup
Configuration to Current Configuration, device will
reboot after the copy.
Configuration files which are copied in the access
point.
Creating time of configuration files in the access point.
105