TP-Link CPE210 Installation Manual page 4

English
Software Configuration
This chapter introduces the login to the PharOS Web Interface and the
software configurations.
1. Logging into the PharOS
1. Before accessing the PharOS Web Interface, you need to assign
a static IP address 192.168.0.X (X ranges between 2 and 253, e.g.
192.168.0.10) to your computer.
Open a web browser, type http://192�168�0�254 into the address
2.
field and press Enter (Windows) or return (Mac). It is recommended
to use the latest version of Google Chrome, Firefox or Safari.
Enter admin for both User Name and Password, then select your
3.
Language from the drop-down list. Read and agree the terms of
use, then click Login.
4. Change the default User Name and Password to protect your CPE.
Let's start configuring the CPE.
For subsequent logins, use the new username and password.
2. Configuration for Typical Applications
The typical topology is as follows. A wireless bridge is built between two
locations that are far from each other. Follow the instructions below to
configure the Access Point and the Client.
Computer
Access Point
LAN: 192.168.0.254
02
Client
LAN: 192.168.0.2
IP camera