Panasonic BL-C1 Operating Instructions Manual page 66

Operating Instructions
Setting
Server IP
Address or
Host Name
*1
Port No.
Login ID
*2
Password
*2
Login Timing •
Upload File
Name
*1
Overwrite
Setting
Data
Transfer
Method
Note that [Space], ["], ['], [&], [<] and [>] are not available.
*1
Note that ["] is not available.
*2
• If you set a server IP address, set 4 numbers (0—255) and 3
periods, such as "192.168.0.253". Note that "0.0.0.0" and
"255.255.255.255" are not available. Or set a host name (1—
255 characters).
• Enter a number (1—65535). Usually set to 21.
• If your ISP requires a login ID, set it (0—63 characters).
• If your ISP requires a password, set it (0—63 characters).
Select the login setting for the FTP server. If you set [One
Time] and the image buffer frequency value is set within 1
minute, the camera logs in to the server only once. This can
reduce transfer time.
• Set a file name on the FTP server to receive the transferred
files. Enter 1—234 characters. Entering "\" creates directories
for a file. (E.g. NetworkCamera\image)
• Selecting [Overwrite File] overwrites the image on the server
with a newer image. Selecting [Save as New File with Time
Stamp] saves the image attaching time stamps on the file
name, and the images are not overwritten.
(E.g. image20050101093020500.jpg) The underlined
numbers mean "9h30min20s500ms on January 1, 2005". The
letter "s" is inserted after the day when referring to a summer
time zone.
• Select [Passive Mode] normally. If the transfer does not work,
select [Active Mode] and check the operation.
Description
66