Panasonic AJ-SDC915 Operating Instructions Manual page 148

REMOTE menu screen
!LED (REMOTE) screen
The display of the various !LED information items appearing inside the viewfinder in the remote control mode is set ON or OFF
on this screen.
>O ! L E D
( R EMO T E )
N
G A I N ( 0 d B ) :
O F F
G A I N ( 3 d B ) : O F F
s
:
S H U T T E R O F F
:
WH I T E P R E S E T O F F
:
E X T E N D E R O F F
:
F I L T E R O F F
:
S U P E R V O F F
:
2 5 M / 5 M 0 O F F
ÁIf both GAIN (0 dB) and GAIN
(p3 dB) have been set to ON at
the same time, !LED will light on
condition that settings other than
0 dB and p3 dB have been re-
spectively selected for the two
GAIN items.
|Note{
This screen is valid only in the re-
mote control mode. When it is valid,
what has been set on the !LED
screen has no effect.
TALLY/RET (REMOTE) screen
The setting for the lighting of the tally lamp during recording and return switch setting are selected on this screen.
>O
( R EMO
T A L L Y / R E T
:
R E C T A L L Y R E D
:
R E T SW C AM R E T
|Note{
This screen is valid only in the re-
mote control mode. When it is valid,
what has been set on the MAIN
FUNCTION screen has no effect.
The underlining in the variable range column indicates the setting in the preset mode.
USER menu: The USER menu appears when the MENU switch is set to SET.
ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
Item
GAIN (0 dB)
GAIN (p3 dB)
SHUTTER
WHITE PRESET
EXTENDER
FILTER
SUPER V
25M/50M
T E )
N
Item
REC TALLY
RET SW
VF
display
ON ENG
OFF
ON ENG
OFF
ON ENG
OFF
ON ENG
OFF
ON ENG
OFF
ON ENG
OFF
ON ENG
OFF
25M ENG
50M
OFF
VF
display
RED ENG
GREEN
CHARA
CAM RET ENG
REC
CHECK
– 148 –
Remarks
ON: This display lights when a setting other than
0 dB has been selected for the gain.
OFF: The display does not light.
ON: This display lights when a setting other than
p3 dB has been selected for the gain.
OFF: The display does not light.
ON: This display lights when the shutter
(except with SUPER V) is ON.
OFF: The display does not light.
ON: This display lights when the AWB
has been set to PRST (PRESET).
OFF: The display does not light.
ON: This display lights when the
extender is used for the lens.
OFF: The display does not light.
ON: This display lights when a setting other than
3200K has been selected for the filter.
OFF: The display does not light.
ON: This display lights when SUPER V is ON.
OFF: The display does not light.
25M: This display lights when the REC
MODE has been set to 50M.
50M: This display lights when the REC
MODE has been set to 25M.
OFF: The display does not light.
Remarks
For selecting the method used to
advise the user that recording is
underway.
RED: The red tally lamp lights.
GREEN: The green tally lamp lights.
CHARA: The character lamp lights.
For selecting the return switch
function.
CAM RET: The return signal
output operation is
performed.
REC CHECK: The REC CHECK
operation is performed.