Recording With An External Vtr Instead; Adaptor - Panasonic AJ-SDC915 Operating Instructions Manual

Recording With an External VTR Instead of the Internal VTR
Using the 26-pin/12-pin Output Adaptor
Connections
The method of connecting the external VTR is the same as that described in "Recording Simulta-
neously with the Internal VTR and an External VTR".
ÁSee "Connections" on page 101.
Mounting the 26-pin/12-pin output adaptor
ÁConsult your local dealer when mounting the adaptor.
1
Set the unit's internal switches.
1
Remove the side panel on the display window side.
2
Remove the printed circuit board holder, and take out the CAM ENC (2) printed circuit
board.
3
Set SW201 to the ON side.
4
Take out the SYNC (3) printed circuit board.
5
Set SW1 (26PIN) to the ON side.
6 To set the audio level to p20 dB, set the SW4701 DIP switch accordingly.
1
2
3
4
5
6
SW4701
– 104 –
CAM ENC (2) Printed Circuit Board
CAM ENC (2) Printed Circuit Board
ON
p60 dB
Pin No. (default
setting)
1
2 ON (NR ON/OFF)
3 ON
4 OFF
5 ON
6 OFF
Printed Circuit
Board Holder
SONY
N
MII
SW1
p20 dB
Not used
OFF
ON
OFF
ON