Diagnostic Screen; Evaluation Screen; Option Screen - Panasonic AJ-HDC27FE Operating Instructions Manual

Setting menu screens

DIAGNOSTIC screen

The usage statuses and software versions are
displayed on this screen.
Variable
Item
range display
==
CAMSOFT (IN) ENG
==
CAMSOFT (OUT) ENG
==
CAM TABLE ENG
==
PLD (CAM) ENG
==
PLD (SHD) ENG

EVALUATION screen

The items which are measured for evaluation
purposes are set on this screen.
(S/N, MODULATION, RESOLUTION, SENSITIVITY)
VF
SUB menu
display
S/N ENG Index for opening the S/N
measurement screen.
MODULATION ENG Index for opening the modulation
measurement screen.
RESOLUTION ENG Index for opening the resolution
measurement screen.
SENSITIVITY ENG Index for opening the sensitivity
measurement screen.
The underlining in the variable range column indicates the setting in the preset mode.
FILM (CAM) MAIN MENU 4
VF
Remarks
For displaying the version
of the software for the
built-in flash memory.
For displaying the version
of the software for the
external flash memory.
For displaying the version
of the gamma table.
For displaying the version
of the software for the
camera system computer.
For displaying the version
of the software for the
shading.
Remarks

OPTION screen

The engineer menu display is selected on this screen.
Variable
Item
range
ENG SECURITY ON
OFF
SHD, ABB SW ON
CTRL OFF
AWB AREA 25%
50%
90%
AWB & ABB ON
OFFSET OFF
CAM MENU SEL VIDEO MENU
FILM MENU
SYSTEM FREQ. 59.94Hz
60.00Hz
<Note>
For details on how to release ENG SECURITY, consult your nearest
service centre.
111 (E)
VF
Remarks
display
ENG For selecting whether to
display the engineer
menu.
ON : The engineer menu
is not displayed.
OFF : The engineer menu
is displayed.
ENG For selecting whether to
automatically correct black
shading when the AUTO W/B
BAL switch is pressed
continuously for 8 seconds or
more on the ABB side.
ON : Black shading is
corrected automatically.
OFF : Black shading is not
corrected automatically.
ENG For selecting the white
balance search area.
ENG For setting how gain and
pedestal values, which are
set on the ROP screen of
FILM (CAM) MAIN MENU
1, are to be processed
after auto white balance
and auto black balance
are performed.
ON : Settings are added.
OFF : The values are reset
to zero.
ENG For setting the unit's
operation mode.
VIDEO MENU:
The unit is set to the
video mode.
FILM MENU:
The unit is set to the film
mode.
ENG For setting the unit's frame
frequency.