Panasonic AJ-HDC27FE Operating Instructions Manual page 32

Adjusting the white shading
32
If the lens is provided with an extender, engage
the extender function, and repeat steps
31
.
The compensation values for when the lens
extender function is provided and for when it is
not are both stored in one file in memory.
The white shading adjustment is now complete.
The adjusted values are retained in the non-volatile
memory so that there is no need to adjust the white
shading again even after the unit's power is turned off.
Reading white shading files
1
Perform the menu operations (pages 86 to 88),
and display the "WHITE SHADING" screen of FILM
(CAM) MAIN MENU 4.
n < W H I T E S H A D I N G >
S E L E C T
R E A D
D E T E C T I O N ( V S A W )
C O R R E C T
T I T L E :
1 :
2 :
3 :
4 :
2
Turn the JOG dial button to move the arrow
(cursor) to the SELECT item
3
Press the JOG dial button and the file number will
flash. Turn the JOG dial button to select the file (1
to 8) to be read.
< W H I T E S H A D I N G >
n S E L E C T
R E A D
D E T E C T I O N ( V S A W )
C O R R E C T
T I T L E :
1 :
2 :
3 :
4 :
4
Press the JOG dial button to enter the file number.
24
: 1
: O N
5 :
6 :
7 :
8 :
: 1
: O N
5 :
6 :
7 :
8 :
5
Turn the JOG dial button to move the arrow
to (cursor) to the READ item
< W H I T E S H A D I N G >
S E L E C T
n R E A D
D E T E C T I O N ( V S A W )
C O R R E C T
T I T L E :
1 :
2 :
3 :
4 :
6
When the JOG dial button is pressed, the following
message appears.
< C A M C A R D R E A D / W R I T E >
R E A D
S E L E C T
W R I T E
S E L E C T
C A R D C O N F I G
R E A D U S E R D A T A
T I T L E
R E A D ?
Y E S
n N O
7
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
The recorded data from the white shading file is
read.
8
Press the MENU button twice.
The setting menu is cleared, and the displays
showing the unit's current statuses appear at the
top and bottom of the viewfinder screen.
32 (E)
: 1
: O N
5 :
6 :
7 :
8 :
: 1
: 1
: