Viewfinder Displays; Led Displays; Character Displays - Panasonic AJ-D215P Operating Instructions Manual

Viewfinder displays

LED displays

AUDIO TALLY STBY
GAIN BATT VTR

Character displays

Audio CH1 level meter
----------+++++
----------+++++
Audio CH2 level meter
TCG 00:00:00:00
Time code display
AUDIO (yellow): This is not used in this system.
TALLY (red):
STBY (green):
GAIN (yellow):
BATT (yellow): This flashes when the battery charge has dropped.
VTR (yellow):
Remaining tape display
Color temperature display
(this remains displayed in the ATW mode)
120 min
M4400
SHUTTER 1/100
SCENE data MARK display
O These displays appear when the CHARACTER switch at the front of
the viewfinder is set to ON.
O Each individual display can be turned off by setting the corresponding
menu item.
O When the mode check switch has been pressed, the current statuses
are displayed regardless of whether the individual displays have been
set ON or OFF using the corresponding menu items or whether the
CHARACTER switch is ON or OFF.
O The color temperature display in the ATW mode and the SCENE data
MARK will appear even when the CHARACTER ON/OFF switch is at
the OFF position.
This lights during recording. It flashes as the tape is
approaching the recording position from unloading or
when trouble has occurred.
This is not used in this system.
This lights when the camera gain is increased.
This lights or flashes when trouble has occurred in the
VTR.
F2.8
Lens f-value display
14.6V
Battery voltage display
0 dB
Gain display
(this appears when the gain is selected)
Electronic shutter speed display
(this appears when the shutter speed is selected)
MARK 1
– 15 –