Camera Setting Menu - Panasonic AJ-D215P Operating Instructions Manual

CAMERA SETTING menu

Menu item
GAIN SELECT 0/6/12
0/9/18
WHITE PRESET INDOOR
OUTDOOR
FLUOR
AUTO IRIS –3.0
SETUP LEVEL
DETAIL LEVEL
CHROMA PHASE –32
CHROMA GAIN
TV 4 : 3 16 : 9
16 : 9
PICTURE MODE NORMAL
FRAME
The underlining for the mode settings indicates the modes selected before the unit was shipped from the
factory.
– CAMERA SETTING –
iGAIN SELECT
WHITE PRESET
AUTO IRIS
SETUP LEVEL
DETAIL LEVEL
CHROMA PHASE
CHROMA GAIN
TV 4 : 3 16 : 9
PICTURE MODE
Mode setting
Selects whether the 0/6/12 dB or 0/9/18 dB settings are to apply
to the operation of the camera gain selector switch.
Selects whether OUTDOOR, INDOOR or FLUOR (fluorescent
lighting) is to be set when the camera's WHITE BAL selector
switch is at the PRST position.
Selects the target brightness of the auto iris. The brightness can
: be set in 0.1 increments from –3.0 to 3.0.
0 Example: When –1.5 is selected, the iris is closed by
:
3.0
0% Sets the camera setup level. Either 0% or 7.5% is selected.
7.5%
0 Finely adjusts the camera detail level. Adjustment is possible
: from 0 to 16.
2
:
16
Finely adjusts the camera's chroma phase. Set the value in the +
: direction if the skin color is to be made redder or in the – direction
0 if it is to be made more yellow. Any value from –32 to 32 can be
: set.
32
0 Adjusts the camera's color intensity. The higher the value, the
: greater the intensity of the colors. Any value from 0 to 63 can be
63 set.
4 : 3 Selects whether the camera is to be used for screen dimensions
of 4:3 or 16:9.
NORMAL is selected for ordinary shooting.
setting, pictures have the "skipped frame" effect.
: 0/6/12
: INDOOR
: 0
: 7.5%
: 2
: 0
: 63
: 4 : 3
: NORMAL
Description of function
approximately 1.5 stops from the factory setting.
However, there may be a slight deviation from this
value.
– 53 –
At the FRAME