Advertisement
Your Memorex ThumbDrive
1. Memorex ThumbDrive
2. ThumbDrive installation CD-ROM (for Windows
OS 8.6 or higher already have the proper drivers in the operating system.)
3. ThumbDrive User Guide
Please notify your distributor or retailer if any of the above is missing.
WINDOWS 98/98 SE DRIVER INSTALLATION*
1. Turn on your computer and wait for the Windows desktop to appear on your screen.
2. Close any applications you may have running.
3. Insert the Memorex ThumbDrive installation CD into your CD-ROM drive. The driver installation
procedure is automatic, as a dialogue box will pop up (Figure 1) to give you the option to install the
drivers. The dialogue box will also give you the option to Remove your drivers or Cancel the installation
as well if these actions are required.
4. Select "Install", and the drivers will be loaded onto your computer.
NOTE: If your computer's CD-ROM drive is not set up for automatic disc detection go to Step 6.
5. Once completed, you will receive a confirmation that the drivers have been successfully transferred to your
system. (Figure 2). Remove the installation CD from the drive and click "OK" to reboot your computer. Your
Memorex USB ThumbDrive is now ready to use.
If your computer does not automatically run the Driver Install disk, you will need to
conduct this process manually.
should include:
Figure 1
Figure 2
98 and 98 SE only. Windows
User Guide
Rev 1.2
ME, 2000, XP and MAC
Advertisement
