Temp (Colour Temperature); P-Nr (Picture Noise Reduction); Ai (Artificial Intelligence); Scan Mode - Panasonic TX-76PW100A Operating Instructions Manual

Picture Menu Operation
C. TEMP The C. TEMP (Colour Temperature) control allows
you to change the White balance setting between
Standard, Warm and Cool.
Use the
P-NR The P-NR (Picture Noise Reduction) system is
designed to reduce picture noise during poor quality
reception conditions. Pushing the left or right buttons
will change the setting between OFF, STRONG,
WEAK and AUTO.
Use the
AI When the AI (Artificial Intelligence) is turned on it
continually and precisely detects fine differences in
the picture signal. It also detects the differences in
the brightness, black level and contrast levels.
Use the

SCAN MODE

The SCAN MODE control allows you to change the
Picture refresh setting between AUTO, 100Hz
MODE and PROGRESSIVE.
Use the
AUTO
100Hz MODE
PROGRESSIVE
NOTE:
Switching is also possible using the
Note:
We recommend that you set the SCAN MODE to PROGRESSIVE when viewing a PAL 60 or NTSC
transmission. When viewing a PAL transmission (other than PAL 60) with the SCAN MODE set to
PROGRESSIVE, the screen will flicker. This is not a fault.
Normalisation
Pressing the Normal Button (
picture settings to the factory preset levels. This is called "Normalisation".
Normalisation will not occur if the Picture Menu is not displayed when the Normal Button is pressed.
or buttons to switch between settings.
or buttons to switch between settings.
or buttons to switch the AI on or off.
or buttons to switch between settings.
The TV software will select the best mode for the signal being
viewed.
100Hz will give a steady picture for most signals.
Recommended when receiving NTSC signals.
The scan mode function is not available when Picture in Picture is
being used.
) on the remote control, when the Picture Menu is displayed will return all
PICTURE
MENU
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
NTSC-TINT
C. TEMP
P-NR
PICTURE
MENU
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
NTSC-TINT
C. TEMP
P-NR
PICTURE
AI
SCAN MODE
PICTURE
AI
SCAN MODE
button on the remote control.
DYNAMIC
AUTO
DYNAMIC
STANDARD
AUTO
AUTO
AUTO
AUTO
AUTO
15