Connecting Equipment To The Tv; Front Panel Connections; Connecting To The Rgb Input Terminals - Panasonic TX-76PW100A Operating Instructions Manual

Connecting Equipment to the TV

Front Panel Connections

Connecting to the RGB Input Terminals

Behind the front panel door is the headphone socket, the AV3 input and the RGB input.
• Personal computers (PC) with 640 x 480 (31.5kHz / 60Hz) or 640 x 400 (31.5kHz / 70Hz)
resolution can be connected to this television.
Note: the display will prompt you to set the resolution to 640 x 480.
• The computer must be set to High Colour (16 bit).
• In some cases other PCs may not work with this TV set.
• There is no audio signal in RGB mode.
• Connect the sound cables to the AV3 Audio Input terminals.
• Some computers such as PC-98 and Macintosh require a commercially sold adapter between the
RGB cable (D-Sub 15P) and the computer.
• There is no need for an adapter when using computers with a DOS/V compatible D-Sub 15P
terminal.
• With some computers it may be necessary to press Function F4 twice to give a display on the
television.
• There are no computer connection cables included with this television.
Signal names for D-Sub 15P Connector
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
Pin layout for RGB
Terminal
36
Conversion adaptor
(If necessary)
Pin Signal
No. Name
1 R
2 G
3 B
4 GND
5 GND
GND is Ground
RGB
PC Cable
Pin Signal
No. Name
6 GND
7 GND
8 GND
9 NC
10 GND
NC is Not connected
D-SUB 15P
RGB (31.5kHz)
AUDIO
L/MONO R
Mai n S ub S-VIDEO VIDEO
AV3 IN
Pin Signal
No. Name
11 GND
12 NC
13 HD/SYNC
14 VD
15 NC