Table Of Contents; Features; Supplied Accessories - Yamaha YST-SW216 Owner's Manual

VOLTAGE SELECTOR
(For Asia and General models only)
The voltage selector switch on the rear panel of this unit must be set for your local main voltage BEFORE
plugging this unit into the AC main supply. Voltages are 110-120/220-240 V AC, 50/60 Hz.
CONTENTS
FEATURES .................................................................... 1
SUPPLIED ACCESSORIES........................................... 1
PLACEMENT ................................................................ 2
CONNECTIONS ........................................................... 3
Connecting to line output (pin jack) terminals of the
1
amplifier .............................................................. 3
Connecting to speaker output terminals of the
2
amplifier ............................................................... 5
Connecting to the INPUT 1/ OUTPUT terminals
of the subwoofer ......................................................... 7
VOLTAGE SELECTOR switch ............................... 7
Plug in the subwoofer to the AC outlet ...................... 7
CONTROLS AND THEIR FUNCTIONS .................... 8
ADJUSTING THE SUBWOOFER
BEFORE USE ............................................................... 9
Frequency characteristics ........................................ 10
ADVANCED YAMAHA ACTIVE SERVO
TECHNOLOGY II ....................................................... 11
TROUBLESHOOTING .............................................. 12
SPECIFICATIONS ...................................................... 13

FEATURES

• This subwoofer system employs Advanced Yamaha
Active Servo Technology II which Yamaha has
developed for reproducing higher quality super-bass
sound. (Refer to page 11 for details on Advanced
Yamaha Active Servo Technology II.) This super-bass
sound adds a more realistic, theater-in-the-home effect
to your stereo system.
• This subwoofer can be easily added to your existing
audio system by connecting to either the speaker
terminals or the line output (pin jack) terminals of the
amplifier.
• The HIGH CUT switch provides you with two positions
(HIGH and LOW) to adjust the tone balance between the
subwoofer and the front speakers.

SUPPLIED ACCESSORIES

After unpacking, check that the following parts are
contained.
Non-skid pads (1 set, 4 pieces)
1