Usb - Yamaha BRX-610 Owner's Manual

TROUBLESHOOTING
Problem
No sound.
The iPod sounds, but
you cannot operate it
with this unit or the
remote control.
No sound of your
iPod from the TV.
This unit cannot be
operated by the
remote control.
You cannot operate
from the iPod.
The playback
information is not
displayed on the
front panel display.
The iPod does not
charge up.

USB

Note
In case of a transmission error without a status message appearing on the front panel of this unit, check the connection to the USB
device (refer to page 15).
Status message
USB ERROR
Problem
The file in the USB
device does not play.
46
En
Cause
The iPod is not connected correctly.
No sound of your iPod can be output
from this unit to the TV through the
HDMI cable.
The iPod is not supported by this unit.
The iPod is not connected correctly.
The iPod software version is out of date.
The iPod is not connected correctly.
The iPod you set is not compatible with
the playback information display.
The iPod is not connected correctly.
The iPod is not supported by this unit.
Cause
The connected USB device is not
playable on this unit.
The USB device is connected at an
angle.
Cause
The USB device is not recognized.
Incorrect USB device connections.
The file format is not compatible with
this unit.
If the solutions above do not resolve the
problem, the USB device is not playable
on this unit.
Remedy
Connect the iPod and this unit by a USB cable
correctly.
Use the speakers of this unit.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS and iPhone 4
are supported.
Connect the iPod and this unit by a USB cable
correctly.
Update the iPod software version to the latest. If the
problem cannot be solved, even with the latest
software, reset the iPod.
Connect the iPod and this unit by a USB cable
correctly.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS and iPhone 4
are supported.
Connect the iPod and this unit by a USB cable
correctly.
Only iPod classic, iPod nano (2nd, 3rd, 4th, 5th and
6th generation), iPod touch (1st, 2nd, 3rd, and 4th
generation), iPhone, iPhone 3G/3GS and iPhone 4
are supported.
Remedy
Disconnect the USB device. Change input source
other than USB and select USB as input source
again. Then connect playable USB device again.
Remedy
Connect the USB device again.
Connect an AC adapter if supplied with the device.
Connect the USB device again.
Replace the file with a correctly recorded file
playable with this unit.
Try another USB device.
Page
12
—
12
12
—
12
12
12
12
Page
15
Page
15
—
15
3
—