Other Connection; Connecting To The Remote Control Jacks; Connecting The Power Cable - Yamaha BRX-610 Owner's Manual

Connecting to the REMOTE
CONTROL jacks
• You can transmit and receive the remote control signals
by connecting to the REMOTE CONTROL (OUT/IN)
jacks.
• Firmly connect monaural 3.5 mm mini plug cables
(commercially available) to the REMOTE CONTROL
(OUT/IN) jacks.
CAUTION
Do not connect the power cable of this unit until all connections
are completed.
To REMOTE
CONTROL
(OUT) jack
Monaural 3.5 mm
mini plug cable
(commercially
available)
To remote
control in
jack
REMOTE CONTROL IN
Yamaha
component
16
En

OTHER CONNECTION

To REMOTE
CONTROL
(IN) jack
Monaural 3.5 mm
mini plug cable
(commercially
available)
To remote
control out
jack
REMOTE CONTROL OUT
Infrared signal
receiver or Yamaha
component (such as
AV receiver)

Connecting the power cable

After all connections are completed, plug the supplied
power cable into the AC IN on the rear of this unit. Then
plug into AC outlet.
To AC outlet
Note
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH THE UN-INSULATED PARTS OF ANY CABLES
WHILE THE POWER CABLE IS CONNECTED.
To AC inlet