Using Useful Functions; Setting The Sleep Timer; Operating This Unit By Tv Remote Control (The Hdmi Control Function) - Yamaha BRX-610 Owner's Manual

Hide thumbs Also See for BRX-610:
Table of Contents

Advertisement

Available languages

Available languages

Setting the sleep timer

You can set the sleep timer by using the remote control.
The sleep timer sets this unit to standby mode after the
specified time elapses.
PROGRAM
MARKER
1
Press SLEEP repeatedly.
Operating this unit by TV remote
control (the HDMI control function)
You can use the TV remote control to operate this unit if
your TV supports the HDMI control function and is
connected to this unit's HDMI terminal.
Remote control of TV (Example)

USING USEFUL FUNCTIONS

DIGEST
ZOOM
SLEEP
SLEEP
SW
Turns on/off both TV and
this unit.
Controls the volume of
this unit.
Select this unit or TV to
*1
output sounds.
You can also enjoy the following function.
• When you start playback of DVD/BD discs other than
CD discs on this unit or display HOME/SETUP menu
screen, the input selector of the TV is switched to this
unit automatically (One Touch Play).
*1 When you select this unit to output TV sounds by using the
TV remote control, the unit automatically selects TV as the
input source, and sound can be enjoyed from the speakers
connected to the unit.
Notes
• This unit may be operated by using cursor buttons of TV remote
control for some TVs.
• Even if your TV supports the HDMI control function, some
functions may not be available. For details, refer to the manual
supplied with your TV.
• HDMI control function may not work properly depending on
the TV.
• Functions other than ones shown above may work depending on
the TV.
• In order to make the HDMI control function available, set up
settings for the HDMI control function on ALL components
(this unit, TV, and other components). Certain operation may
also be required.
• Each function may be set independently to activate/deactivate
depending on the TV.
• Refer to the operation manuals supplied with the TV for details
regarding setup.
■ Setting the HDMI control function
1
Turn on all components connected to the TV with
HDMI.
2
Check all components connected with HDMI and
enable the HDMI control function on each
component.
For this unit, set [HDMI Control] to [On] (p. 36).
For external components, refer to the manual
supplied with each component.
y
• The default setting of [HDMI Control] is set to [Off] for
this unit.
• The example of TV settings
– From a setup menu on your TV, select "Link setting" =
"HDMI control setting" (example), then set a setting
such as "HDMI control function" to "ON" (example).
– Setting such as "Speaker priority" should be set to "AV
amplifier".
3
Turn off the TV and then turn on it again.
31
En

Advertisement

Table of Contents
loading

Table of Contents