The opening screen of the Diagnostic program will appear
onscreen at the master station. Follow the cues at the foot
of the screen to select and run the Network Test program
at the master station. The master station then begins
broadcasting test packets, and at the same time is also
ready to receive and return test signals transmitted from
the slave station's newly installed DE-660T/CT+.
5. Remove the DE-660T/CT+ Driver Diskette from your
station's (the master station's) diskette drive, and insert
it into an available drive of a slave station on your LAN.
At the DOS prompt (here shown as >), key in:
!
!
"#$
!