Cabinet Disassembly Instructions - Toshiba D-R265SE Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[9] FAN
[8] FAN COVER
[1] COVER TOP
[2] PANEL FRONT
[3] DVD MECHANISM & DVD MAIN BOARD ASSEMBLY
[4] BOARD SWITCH
[5] BOARD HOLDER
[10] PANEL REAR
[11] BOARD POWER
[12] BOARD JACK
2. Disassembly Method
ID/
Loc. Part
Fig.
No.
No.
[1] COVER TOP D1 8(S-1)
PANEL
[2] D2 *6(L-1), *3(L-2)
FRONT
DVD
MECHANISM
[3] & DVD MAIN D3
BOARD
ASSEMBLY
BOARD
[4] D4 (S-3), Desolder
SWITCH
BOARD
[5] D4 2(S-4)
HOLDER
BOARD
[6] POWER D4 2(S-5), *CN1152
SUPPLY
POWER
[7] D4 (S-6)
HOLDER
[8] FAN COVER D5 2(S-7)
[9] FAN D5
NOTE: BOARD MEANS PRINTED CIRCUIT BOARD.
[6] BOARD POWER SUPPLY
[7] POWER HOLDER
[13] BOARD AFV
Removal
Remove/*Unhook/
Unlock/Release/ Note
Unplug/Desolder
4(S-2), *CN101,
*CN701, LOCKING
CARD SPACERS
FAN EARTH,
*CN1601
ID/
Loc. Part
No.
[10] PANEL REAR
BOARD
[11]
POWER
[12] BOARD JACK D6 Desolder
[13] BOARD AFV
↓ ↓
(1) (2)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
Reference Notes
1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
---
1
[1] COVER TOP
(S-1)
---
---
---
---
---
---
---
1-5-1
Removal
Remove/*Unhook/
Fig.
Unlock/Release/
No.
Unplug/Desolder
(S-8), 6(S-9),
D5
2(S-10)
D6 3(S-11)
D6 Desolder
↓ ↓
(3) (4)
(S-1)
(S-1)
Fig. D1
E7B71DC
Note
---
---
---
---
↓
(5)