Cabinet Disassembly Instructions - Toshiba D-RW2SU Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] COVER TOP
[2] PANEL FRONT
[3] DVD MECHANISM & DVD MAIN BOARD ASSEMBLY
[4] BOARD SWITCH
[5] BOARD HOLDER
[6] PANEL REAR
[7] BOARD POWER
2. Disassembly Method
ID/
Loc. Part
Fig.
No.
No.
[1] COVER TOP D1 7(S-1)
PANEL
[2] D2 *6(L-1), *3(L-2)
FRONT
DVD
MECHANISM
[3] & DVD MAIN D3
BOARD
ASSEMBLY
BOARD
[4] D4
SWITCH
BOARD
[5] D4 2(S-4)
HOLDER
PANEL
[6] D5 2(S-5), 6(S-6)
REAR
BOARD
[7] D5
POWER
↓ ↓ ↓
(1) (2) (3)
NOTE: BOARD MEANS PRINTED CIRCUIT BOARD.
Removal
Remove/*Unhook/
Unlock/Release/ Note
Unplug/Desolder
---
1
4(S-2), *CN101,
*CN701,
LOCKING CARD ---
SPACERS,
MAIN SHEET
(S-3), S PLATE
---
EARTH, Desolder
---
---
3(S-7), HEAT SINK
---
EARTH PLATE
↓ ↓
(4) (5)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
Reference Notes
1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
[1] COVER TOP
(S-1)
1-5-1
(S-1)
(S-1)
Fig. D1
E7A70DC