Connections - Panasonic TX-P65VT60Y Operating Instructions Manual

Connections

External equipment and cables shown are not supplied with this TV.
Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Check the type of terminals and cable plugs are correct when connecting.
Always use a fully wired SCART or HDMI cable.
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
Also read the manual of the equipment being connected.
Terminals
12 11
Basic connections
To ensure your satellite dish or aerial is correctly installed, please consult your local dealer. Also please consult the
received broadcasting companies for details.
Mains lead and aerial
Mains lead
(supplied)
AC 220-240 V
50 / 60 Hz
8
2
1
3
10 9 8 7
DVB-C, DVB-T, Analogue
Mains lead
Push until both side
tabs click
1 CI slot 1 - 2
2 SD Card slot
3 Headphone jack
4 USB 1 - 3 port
4
5 HDMI1 - 3
6 DIGITAL AUDIO
7 AV2 (COMPONENT / VIDEO)
8 AV1 (SCART)
9 SERVICE PORT
This terminal is for special
5
applications used by authorised
service dealers.
10 Terrestrial / cable terminal
11 Satellite terminal
6
12 ETHERNET
RF cable
Make sure that
the mains lead is
securely fixed.
(p. 11)
(p. 11)
(p. 9, 11)
(p. 10)
(p. 9)
(see below)
(p. 9)
(p. 10)
Terrestrial aerial
Cable
To remove from the TV:
tabs
Press both tabs and pull
on mains connector to
release