Technical Information; Installation Considerations - Axor Terrano 37547xx1 Installation & User's Instructions

2⅞" 2⅞"
17455xx1
3⅜"
2" 2⅜"
17446xx1
2⅛" 2¾"
37547xx1
This unit meets or exceeds the following:
• ASME A11.18.1
• CSA B15.1
• Listed by IAPMO
• Approved for use in Massachusetts

9⅛"
9⅛"
2⅞"
8" 9"
2⅜"
7" 9½"
2¾"
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - handshower
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• This trim kit requires rough valve 13444181
(not included).
• The rough valve must be installed, and the
mounting surface complete and made water-
tight before installation of this trim kit.
• This unit is not anti-scald. If required
by local plumbing code, install this
unit in combination with an approved
remote pressure balance valve or
other approved device.
• Protection against backflow is provided by a
check valve and by a self-resetting diverter.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
15 - 75 PSI
145 PSI
10° - 140° F*
176°F*
.5 GPM