Preset Timing Modes - Samsung UD55C-B User Manual

- This product can be set to only one
resolution for each screen size to obtain
the optimum picture quality due to the
nature of the panel. Using a resolution
other than the specified resolution may
degrade the picture quality. To avoid
this, it is recommended that you select
the optimum resolution specified for
your product.
- Check the frequency when you
exchange a CDT product (connected
to a PC) for an LCD product. If the LCD
product does not support 85Hz, change
the vertical frequency to 60Hz using the
CDT product before you exchange it
with the LCD product.

Preset Timing Modes

The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC
does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by
referring to the graphics card user manual.
Resolution Horizontal Frequency
(kHz)
VESA, 640 x 480 31.469
IBM, 720 x 400 31.469
MAC, 640 x 480 35.000
MAC, 832 x 624
49.726
VESA, 640 x 480
37.861
VESA, 640 x 480 37.500
VESA, 800 x 600 35.156
VESA, 800 x 600 37.879
VESA, 800 x 600
48.077
VESA, 800 x 600
46.875
VESA, 1024 x 768 48.363
VESA, 1024 x 768 56.476
VESA, 1024 x 768 60.023
VESA, 1152 x 864
67.500
Vertical Frequency (Hz) Pixel Clock (MHz)
59.940 25.175
70.087 28.322
66.667 30.240
74.551 57.284
72.809 31.500
75.000 31.500
56.250 36.000
60.317 40.000
72.188 50.000
75.000 49.500
60.004 65.000
70.069 75.000
75.029 78.750
75.000 108.000
Sync Polarity (H/V)
-/-
-/+
-/-
-/-
-/-
-/-
+/+
+/+
+/+
+/+
-/-
-/-
+/+
+/+
146